![]() One thing that commonly confuses is the ideal of “0 dB” on a receiver. The prominence of bass/mid/treble frequencies.This is because several variables impact the loudness of the sound system. The only thing that matters is the number of decibels output by the receiver, not the specific scale that the device measures volume by. The key thing to understand is that the values used to indicate the level on your receiver are meaningless. Perhaps you’ve recently switched from an old receiver to a new model and have found that you have to turn the level control much higher than was previously necessary to achieve the same volume. There are a few potential reasons for this, which are easy to solve once you understand them. ![]() Why Do I Have To Turn My Receiver So High?Ī common problem that leaves people scratching their heads, is why the level on a receiver needs to be turned so high for the speakers to produce adequate volume. To test the level, you simply need to activate this feature and hold the SPL meter while standing or sitting in the main listening location concerning your audio setup. ![]() It is much safer to use this feature to check the level of your speakers rather than using music because the one-dimensional tone is less likely to damage your ears.īass frequencies are the biggest cause of hearing damage, and therefore the test tone of the receiver is made up of mid and high frequencies only. This test tone usually consists of a beeping sound, which is activated by pushing a button on the receiver, or its accompanying remote control. Your receiver is likely to have a wide-band pink-noise test tone built into it, which is specifically for checking the dB of your output. The most reliable way to check the levels of your speakers is by using a device known as an SPL meter. Anything over this is likely to cause a disturbance or harm your ears if you get too close to the speakers. If your space is smaller than average, you could limit this to 70 dB and likewise, if you have a particularly large listening space you could push it to 80 dB. ![]() Generally, the best level to set your speakers to is 75 dB.The power of your speakers is also something that needs to be considered.īy assessing each of these variables, we can establish the best level for you to choose to provide the perfect blend of clarity, volume, tone, and the protection of your and other listener’s ears. These include the layout of the room where your audio system is set up, the acoustics of the space, and of course, the distance between the listener and the speakers. This is because several contributing factors come into play. Unfortunately, I can’t provide you with a definitive optimal level that you should set your speakers to. Secondly, by setting your speaker levels too high you’re likely to upset your housemates or neighbors! Despite this, it’s important to find the perfect level for your speakers so that you can enjoy music and other audio types to the fullest, without missing out on any of the details. Our ears are sensitive to high volumes, especially when we’re exposed to them constantly. Firstly, there’s the risk that you’ll damage your hearing. If your speaker’s levels are set too high, this poses some obvious issues. One of the key areas you need to assess is the level that your speakers are set to. In this guide, I’ll advise you on the optimal levels to set your speakers to.Įven if you’ve got all of the necessary gear in your home audio system, you still need to take certain measures to ensure that you get the best listening experience possible. Thankfully, this can be solved if certain measures are followed. It can be very frustrating when you have to turn your receiver up so high that there’s not much headroom left to get additional volume through the speakers. Several variables impact this, including the position of the speakers, the distance between them, and the acoustics of the room.Ĭalibrating the speakers in your home audio system is essential if you want to enjoy the best possible quality and dynamics. This can be established using a decibel meter. What levels should you set your speakers to?Īs a general rule speakers should be set between 70-80 dB in volume. Choosing the best levels for your speakers is a vital part of setting up your system. No matter how competent the various components of your audio system are, unless the levels are optimally set, the listening experience will be hindered.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |